Description
Ancor 300145 is white write-on identification tubing, 1/4 in by 3 in, 10 pieces. It is flattened 3:1 heat shrink held on polyester strips so a label can be written or printed before the tube is shrunk. Once it is heated, Ancor says the mark stays put in oil and moisture.
There is no adhesive lining. Ancor says it should not be used in place of regular heat shrink on a terminal. The recommended range is 0.091 to 0.215 in. It is UL recognized and CSA approved, and the operating range is -30°C to 105°C.
Details
- Part 300145, pack of 10
- White, 1/4 in by 3 in
- Write or print, then shrink
- No adhesive. Not a terminal seal
- Use on wire from 0.091 to 0.215 in




